Stencil Maker – Free Stencils From Photos and Text With Bridges
This free stencil maker turns a photo, a painting, or your own text into a stencil you can really cut. It reduces the picture to one, two, or three layers, removes crumbs that are too small to cut, and adds bridges automatically wherever a piece would fall out, like the inside of an O, A, or R. Download the stencil as PNG or SVG for a cutting machine, or print it at real size across several sheets of US Letter or A4 paper. Everything runs in your browser, with no upload and no watermark.
How to Make a Stencil From a Picture
- Load a picture. Upload a photo, take one with your phone, paste an image, or try one of the public domain masterpieces. A portrait with strong light from one side or an object against a plain background works best.
- Choose the number of layers. One layer gives a classic black and white stencil. Two or three layers add mid-tones, sprayed or painted one after another.
- Adjust the thresholds. Each layer cuts everything darker than its threshold. Click Auto to let the tool choose, then move the sliders until the face or the object reads clearly.
- Clean up. Smooth the edges, remove pieces that are too small to cut, and check the bridges under Layer 1, Layer 2, and so on, where they are highlighted in orange.
- Set the size. Enter the width of the artwork. The tool shows the full sheet size including the uncut border.
- Download or print. Save a PNG or SVG, or click “Print at real size” to print the stencil on as many pages as it needs.
In the preview, “Painted result” shows how the stencil will look after painting, with the bridges as small gaps. The layer views show the sheet you cut: dark areas are the holes, the light area is the material that stays.
Why Stencils Need Bridges
A stencil is a sheet with holes. Paint goes through the holes and the material around them blocks it. The problem starts with islands: parts of the material that are completely surrounded by holes. The inside of a letter O is the classic example. If you cut the ring, the middle falls out and the O turns into a filled dot. The same happens with eyes, nostrils, the gaps between fingers, and the white highlights in a portrait.
The fix is a bridge, a narrow strip of material that holds the island in place. Traditional stencil letters, the ones you know from crates and army stencils, have these gaps built into the font. Most online stencil makers only convert a picture to black and white and leave the islands to you. This tool finds every island and adds the bridges for you:
- It searches for the shortest way from each island to the surrounding sheet, or to an island that is already attached, and lays a bridge along that path.
- With “Two (more stable)”, it adds a second bridge on the opposite side of the island, so long or heavy pieces do not twist when you paint.
- Bridge width is set in real units, from 1 to 10 mm (about 0.04 to 0.4 inches). It follows the stencil size you enter, so a bridge of 3 mm stays 3 mm wide on paper whether you print 8 or 30 inches wide.
- Islands inside islands, like a highlight in an eye inside a face, are handled step by step from the outside in.
Turn on “Highlight bridges” and open a layer view to see every bridge in orange. If you prefer to draw your own bridges, switch them off and add them later in your cutting software, using the SVG.
One, Two, or Three Layers
Each layer is cut from a separate sheet. The tool builds the layers the way most spray artists do: the first layer is the biggest and lightest, and each following layer cuts only the darker parts.
| Layers | What you get | Good for |
|---|---|---|
| 1 | Black and white, like a woodcut or a notan study | Signs, T-shirts, logos, bold portraits, first projects |
| 2 | A light tone plus a dark tone | Portraits with shading, animals, simple scenes |
| 3 | Light, middle, and dark | Detailed portraits and street art pieces |
You paint the first layer, let it dry, place the second sheet exactly on top, and so on. To line up the sheets, keep “Registration holes in the corners” switched on. Every layer then gets four small square holes at the same positions in its border. Spray a dot through them with the first layer and place the next sheet so that its holes sit on those dots.
The color pickers next to the threshold sliders only change the preview, so you can test a color scheme, for example a light blue, a mid blue, and a navy, before you buy paint. The thresholds use perceived lightness (L* from 0 for black to 100 for white), which matches what your eye sees better than a plain average of red, green, and blue.
Text Stencils With Real Stencil Fonts
Switch to “From text” for lettering, house numbers, signs, and labels. Type up to three lines and choose a font:
- Stencil Block (based on Saira Stencil One), Stencil Serif (based on Stardos Stencil), and Stencil Sans (based on Allerta Stencil) are freely licensed stencil fonts under the SIL Open Font License. Their letters already have bridges, so the tool rarely needs to add any.
- Heavy sans and Bold serif use ordinary bold fonts of your device. Here the automatic bridges do the work: every closed counter in A, B, D, O, P, Q, R, a, b, d, e, g, o, p, and q gets its bridges.
“Letter spacing” adds room between the letters, which makes small text easier to cut. For more lettering ideas, see our guides to block letters and graffiti letters.
What the Clean-Up Settings Do
- Smooth edges (0 to 8) softens the picture before it is split into layers. Higher values give rounder shapes with fewer small details, which are faster to cut.
- Remove pieces smaller than (0 to 10 mm) deletes holes and islands that would be smaller than this size on the finished stencil. You could not cut them cleanly anyway.
- Uncut border (5 to 40 mm) keeps a frame of material around the picture. It holds the whole sheet together and protects the wall or shirt around your design from overspray.
- Cut the light areas instead swaps holes and material, for example for light paint on a dark wall.
The status line under the preview tells you how many bridges were added to how many islands and how many small pieces were removed.
Print a Stencil at Real Size
“Print at real size” prints the stencil in exactly the width you entered. If it is larger than one page, the tool splits it into tiles and chooses portrait or landscape, whichever needs fewer pages. Before you print, the panel shows the number of pages, for example “Prints on 4 page(s) per layer (2 × 2)”.
- Each page has a label such as A1, A2, B1, so you know where it goes.
- Neighboring pages overlap by 10 mm (0.4 in). A dashed orange line marks where the next page starts. Lay the pages on top of each other along that line and tape them.
- A 1 inch scale bar on every page lets you check that the printer did not shrink the page. Print at 100% or “Actual size”, not “Fit to page”.
- Print the shown layer or all layers, with the cut areas filled black or as an outline that saves ink.
Then glue or tape the printout onto your stencil material, or transfer the lines, and cut.
SVG and PNG for Cricut, Silhouette, and Laser Cutters
The SVG download traces the stencil into smooth vector shapes. It carries the real size in millimeters, so cutting software imports it in the right size. In the “Painted result” view the SVG contains every layer as its own group in its preview color. In a layer view it contains only that layer in black. Open it in Cricut Design Space, Silhouette Studio, Inkscape, or the software of your laser cutter and cut the dark shapes.
The PNG download is rendered from the same vector shapes at up to 4,000 pixels, either as the painted preview or as one layer in black on white.
Tips for Cutting and Painting a Stencil
- Material: cardstock is fine for one or two uses. For repeated use, cut stencil film (Mylar), acetate, or thin plastic sheets.
- Cutting: use a sharp craft knife on a cutting mat, cut the small inner shapes first and the large outer shapes last, and turn the sheet instead of your wrist on curves.
- Holding the stencil flat: a light coat of repositionable spray adhesive on the back stops paint from creeping under the edges.
- Painting: spray several light coats instead of one heavy one, or dab acrylic paint with a stencil brush or sponge that is almost dry.
- Layers: paint from light to dark and let each layer dry before the next.
Stencils are one of the oldest ways to make images. Hand stencils on cave walls are among the earliest pictures made by people, and the same principle lives on in screen printing and street art. Read more in our articles on spray paint art, Banksy’s stencil works, silkscreen art, and printmaking techniques.
Which Pictures Make Good Stencils?
Strong light and shadow make the best stencils, because the layers follow the light and dark shapes. Good choices are portraits lit from one side, silhouettes against the sky, animals in profile, and simple objects on a plain background. Busy backgrounds, flat front lighting, and fine textures like hair or grass produce many tiny pieces. Crop your photo to the subject before you load it, and use “Smooth edges” and “Remove pieces smaller than” to simplify. Seeing your picture as large light and dark shapes is the same skill painters train with a value study, explained in our guide to negative space in painting.
Privacy
Your picture never leaves your device. The stencil maker processes it in your browser, and nothing is uploaded or stored. The sample paintings are public domain works loaded from Wikimedia Commons.
More Free Art Tools
All our tools are free, run in your browser, and need no account. See them all on the free art tools page.
- Photo to painting: turn a photo into an oil or watercolor painting.
- Photo to sketch: turn a photo into a pencil sketch or line art.
- Photo to coloring page: turn any picture into a printable coloring page.
- Image to pixel art: convert an image into editable pixel art.
- Pixel art maker: draw pixel art on a grid and print it as a pixel pattern.
- Notan generator: plan light and dark shapes with a two- or three-value study.
- Art grid tool: put a drawing grid over any photo.
- Pose reference: practice figure drawing with timed poses.
- Graph Paper Printable: print graph paper, dot grid, isometric, and hex paper to scale.
- Aspect Ratio Calculator for Art: work out aspect ratios and scale art to any canvas size.
- DPI Calculator: find the DPI and largest print size of any image.
- Online drawing board: draw and paint online with brushes, layers, and symmetry.
- Golden ratio overlay: check your composition with a golden spiral and rule of thirds.
- Perspective grid generator: print one-, two-, and three-point perspective grids.
- Paint by number generator: turn a photo into a printable paint by number template.
- Mandala maker: draw symmetrical mandalas and print them as coloring pages.
- Connect the dots maker: turn a picture into a printable dot to dot worksheet.
- Silhouette maker: turn the subject of a photo into a silhouette.
- Picture frame and mat size calculator: work out mat openings and frame sizes for your art.
- Image color picker: find the exact colors in any photo or painting.
- Color name finder: get the name of any HEX, RGB, or photo color.
- Color code converter: convert HEX, RGB, HSL, HSV, and CMYK codes.
- Color wheel: find complementary, triadic, and analogous colors.
- Color mixer: mix paint or screen colors and find paint recipes.
- Color palette generator: create matching color schemes or a palette from an image.
- Random color generator: get random colors and palettes with paint mixing tips.
- Tint and shade generator: make tints, shades, and tones of any color.
- Color blindness simulator: see images and palettes as color blind people do.
- Tracing Worksheets: make tracing worksheets with letters, numbers, and lines.
- Calligraphy Practice Sheets: print calligraphy and hand lettering practice sheets.
- Art Style Quiz: find out which art style fits you.
- Cursive font generator: turn text into cursive letters to copy or download.
- Gothic font generator: write in blackletter and Old English letters.
- Graffiti generator: turn text into graffiti letters with drips and 3D effects.
- Art pricing calculator: find a fair price for your paintings and prints.
- Art quiz: guess famous paintings, artists, and styles.
- Art prompt generator: get random ideas for drawing and painting.
- Random character generator: create an original character with traits and a palette.
Frequently Asked Questions
How Do I Make a Stencil From a Photo for Free?
Load the photo into the stencil maker above, choose one to three layers, and adjust the thresholds until the picture reads well. The tool adds bridges automatically. Then download a PNG or SVG, or print it at real size. There is no sign-up and no watermark.
What Are Bridges in a Stencil?
Bridges are thin strips of material that connect parts of the stencil that would otherwise fall out, like the middle of an O. This stencil maker adds them automatically, one or two per island, in a width you choose.
Can I Use the SVG With a Cricut?
Yes. Upload the SVG in Cricut Design Space and it comes in with the real size you set. The dark shapes are the parts to cut out. For several layers, download each layer view separately or use the painted result SVG, which contains one group per layer.
How Do I Print a Large Stencil on Normal Paper?
Enter the width you want and click “Print at real size”. The tool splits the stencil into pages with a 10 mm overlap, page labels, and a scale bar. Print at 100%, then tape the pages together along the dashed lines.
What Is the Best Material for a Stencil?
Cardstock works for a few uses. For reusable stencils, stencil film (Mylar) or acetate lasts much longer and is easy to clean. The thicker the material, the wider your bridges should be.
How Many Layers Should a Stencil Have?
Start with one layer. Two or three layers give shading and depth, but each layer means one more sheet to cut and line up. The registration holes help you place the layers exactly.
Which Font Is Best for Stencils?
A stencil font with built-in gaps. In text mode, choose one of the three stencil fonts, which already have built-in gaps. If you want a different look, pick Heavy sans or Bold serif, and the tool adds the bridges for you.
Can I Make a Stencil for a T-Shirt?
Yes. Use one layer, a size that fits the shirt, and freezer paper or stencil film. Iron freezer paper onto the fabric with the shiny side down, dab on fabric paint, and peel it off once the paint is dry.







